If you are looking for a project which doesn’t take much time and much fabric to complete you are in the right place. Cylinder Pillow is as easy as any square pillowcase and takes a little effort or skills. This tutorial will show you step by step how to cut fabric and best way to stitch it together. The first pillow took me about 30 minutes to make but the second one only half of this time.You will need a rectangular piece of fabric 19.5 x 16.5 inch and two circles with about 7.5 or 8-inch diameter. I used a breakfast plate to get perfect circle shape. Then you have to sew the rectangular piece to create a sleeve. Simply connect shorter parts of the shape together. Remember to sew on the left side.Now you need to fit in the circular shapes on each end. If you follow my size directions, the circle will be a bit bigger than the sleeve so you will have to make small gatherings here and there. Try to make it as even as possible. I have stitched twice on each side to make it stronger. Now our roll pillow is on the left side altogether so we have to create an opening to turn it on the right side and stuff it. My opening is about 5 inches wide. Now we just have to stuff it and stitch the opening up. Just make sure there is enough of stuffing at each end so your new favorite bolster cushion will keep the desired shape for a long time. You will not be able to close this opening with use of sewing machine, You will have to do it by hand and please make sure to make it nice and flat so you don’t feel the stitch when you use the pillow. By the way, this cylinder pillow is small enough to wash it in the washing machine so you don’t need to make a pillow and a separate case for it. When your roll pillow gets dirty pop it into the washing machine but please don’t use the dryer because stuffing will get very fluffy and pillow might lose its shape.
I hope you have enjoyed this simple cylinder pillow tutorial. If yes please share with your friends.Cylinder Pillow Tutorial,